• FASE 24v 1 Amp Power Supply. 2401SM-2
  • 24v, 1Amp Battery Backed PSU
  • FASE 24v 1 Amp PSU
  • FASE 24v 1 Amp Power Supply WIth 2.3ah Batteries
  • FASE 24v 1 Amp Power Supply WIth 3.2ah Batteries
  • FASE 24v 1 Amp Power Supply WIth 7ah Batteries

24V, 1 Amp Power Supply. 2401SM-2

£52.65

A high efficiency and cost effective, battery backed 24v, 1amp power supply unit for use with 24vdc devices and the FASE/701 range of class change time clocks, electronic sounders and motorised bells.

Power Supply Including Batteries
Quantity

FASE/PSU/24/1

1Amp, 24v Power Supply Unit (PSU)

Highly Efficient Switch Mode Technology

Battery Backup

Mains, Battery & Output LED Indication

Full Electronic Protection

24v, 1Amp, Battery Backed Switch Mode Power Supply

All Fase Controls class change time clocks require a 24vdc supply to power the time clock controller and class change circuits where installed.

The FASE/PSU/24/1 switch mode power supply is a highly efficient, battery backed 1amp power supply ideal for use with our range of class change time clocks and is suitable for powering dedicated class change sounder or motorised bell circuits where installed.

If using a power supply to power electronic class change sounders or motorised bells then circuit loads and volt drops should be calculated. See our Class Change Design Tool.

Use the drop down box above if you require batteries supplying with the power supply.

FASE/PSU/24/1 Specifications

  • High efficiency, cost effective power supply. Ideal for use with the Fase Controls range of class change time clocks.
  • Mains Input Voltage 195-255Vac.
  • Battery Backed. Ensure the class change system still operates during a power cut.
  • Mild steel construction with hinged door. White powder coated.
  • Space for upto 2x 9ah batteries.
  • Max. 1Amp current to load.
  • 2 Output Terminals (Total Load Shared Over The 2 Outputs)
  • Multiple cable entry including 'knock-outs' top and bottom.
  • High efficiency electronics for reduced running costs and lower operating temperature.
  • Electronic short circuit and overload protection on load output under mains operation.
  • Mains transient protection.
  • Mains, Battery and Output status L.E.D indication.
  • Compliant to EMC 2004/108/EC.
  • 1Amp, 2Amp and 3Amp versions available.
FASE/PSU/24/1
19 Items

Data sheet

Type
Power Supply Unit
Model
FASE/PSU/24/1
Output Voltage
24VDC
Max Output Current
1amp Max Output Load
Dimensions
310x340x80mm (HxWxD) - Hinged
Enclosure Colour
White
Supply Voltage
Mains Input Voltage 195-255Vac.
Protection
Electronics shutdown until overload or short circuit removed (under mains power only)
Manufacturer Model Number:
2401SM-2

Specific References

MPN
2401SM-2