Extended Class Change Time Clock. Fase/701/Ext
The Fase/701/Extended allows up to 60 class change alarm times to be set each day. That's a massive 420 individual class change alarms per week. The Fase/701/Extended is designed to be connected to a fire alarm system to give an audible indication of timed events throughout the day like school change of class, dinner & home times, or for factory shift change.
The Fase/701/Ext class change timer will accept up to 60 class change times per day and has highly configurable output settings amongst other advanced features.
Fase/701/Extended Class Change Time Clock
Fase Controls Takes Class Change Time Clocks To A Whole New Level With Our Range Of Incredibly Advanced Class Change Timer Controllers
Designed, developed & manufactured in-house by Fase Controls, the Fase/701 class change timer controller is a highly accurate & powerful class change time clock for automatically indicating school class change events or factory shift changes.
With a clean design and slim profile, the Fase/701/Ext has been designed to install into any modern office and connects to a conventional or addressable fire alarm system to indicate class change events via the building's fire alarm system, saving the need to install additional circuits or indicating equipment.
With a simple to navigate, yet comprehensive menu structure, the Fase/701/Ext class change timer has been designed to be as user-friendly as possible and the simple programming options offered to the engineer help reduce installation & configuration times.
The Fase/701/Ext Class Change Timer will allow up to 60 individual class change times per day to be programmed. The 'Copy Alarms' feature lets the installation engineer set the required class change alarms for Monday and then copy these to all schools days (Mon-Fri) or all days (Mon-Sun). All of which can then be edited as required. This not only makes programming the class change times simple, but it also frees up the installation engineer for other tasks.
The output relay can then be programmed to either pulse or ring continuously as required depending on the fire alarm system the class change controller is being connected to. If this fire alarm system is the conventional type then the class change controller can be connected to the fire panels 'Class Change' input and the Fase/701 controllers output set to pulse. The Fase/701 will then directly control the class change indication.
If the class change controller is being connected to an addressable type fire alarm panel via loop interfaces then the Fase/701/Ext can be set to signal to the fire panel continuously for a selected time period and then the fire panel can be programmed to ring as required, relaying the class change indication.
Every aspect of our Class Change Timer Controllers has been designed around the end-user and installation engineer.
With an intuitive menu structure, all options can be easily navigated to and altered whether you simply need to set the time and date or set the unit to holiday mode through to programming the class change times or ringing styles during installation, the Fase/701 Class Change Timer has been designed to be as easy as possible to operate.
Virtually Maintenance Free
Once installed, there should be very little interaction with the Class Change Timer.
Instead of internal backup batteries for timekeeping purposes, we have used high-quality super capacitors so there are no coin cell type batteries to replace.
Furthermore, all settings are saved to memory and do not need re-programming after the unit has been powered down or following a power cut.
2 Enclosure Styles
The Fase/701/Ext Class Change Timer is available in a Slim or Deep enclosure to help aid installation. Make sure you order the correct enclosure for your needs!
To ensure a clean, modern look our class change timer is supplied with a slim enclosure as standard measuring just 35.5mm in-depth but due to internal components, side cable entry is not advised with the slim enclosure.
If you need to bring cables into any side of the enclosure then make sure you order the deep back enclosure which measures 60.5mm in depth.
Extremely Accurate Time Keeping
The Fase/701/Ext has a time-keeping accuracy of upto ±5ppm from 0°C to +40°C and uses an integrated, temperature-compensated crystal oscillator (TCXO) and crystal. This level of timekeeping accuracy is officially classed as being 'Extremely Accurate'.
Our Class Change Time Clocks counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap Year Compensation Valid Up to 2100.
Highly Configurable Ringing Patterns
The Fase/701/Ext Class Class Timer Controller ringing patterns have been written to be as configurable as possible. The onboard output relay can be configured to pulse or ring continuously for a selectable time duration of between 1 and 59 seconds for every class change event.
The output relay can also be switched manually using the 'Class Change' button located on the front of the controller itself.
Compare Class Change Time Clocks
Nice & Easy
Upto 60 Class Change Alarms Per Day
Advanced Class Change Time Clock
|Class Change Time Clock
|Time & Date
|Class Change Alarms Per Day
|Time Keeping Accuracy
Our Most Accurate Time Clock
|Selectable Operating Modes
|Copy Alarm Function
|Pulsed Output Relay
|Continuous Output Relay
|Password Protect All Functions
|Remote Class Change Input
|Remote Operating Mode Input
|Power Supply Monitor
- Class Change Alarms Per Day
- Upto 60 Alarms Per Day
- Class Change Time Clock
- Enclosure Size
- Deep Enclosure: 170 x 85.5 x 60.5mm (L x H x D)
Slim Enclosure: 170 x 85.5 x 35.5mm (L x H x D)
- LCD Technology
- 1.54" TFT IPS LCD Display With 240x240px resolution
- Enclosure Colour
- Legend Colour
- White Background with Dark Grey Print
- Base Material
- Material Type
- ABS UL94-V0
- UL Rating
- Operating Temperature
- 0°C to +40°C
- IP Rating
- Quiescent Current
- < 35ma
- Max Current
- <120ma With All Outputs Energised & LCD Back Light @ 100%
- Accuracy Upto ±5ppm from 0°C to +40°C
Accuracy ±3.5ppm from -40°C to +85°C
- Output Technology
- 24v Mechanical Relay For Connection To F.A.P
Full Colour TFT Display
Solid State relay For Connection To Fire Doors
- Memory Technology
- EEprom Memory & Super Capacitor (No Coin Cell Required)
- Fire Alarm Connection Details
- Dependant On The System which Is Being Connected To
- Display Type
- TFT-LCD Color
- Contrast Ratio(Typical)
- Viewing Angle Range
- Left:80.0 , Right:80.0 , Up:80.0 , Down:80.0 degree
- Storage Temperature