Complete Class Change Solutions From Fase Controls

Grey Motorised 6-Inch School Bell

Drive Class Change Sounder Circuits Directly From The FASE/701/E/HP or FASE/701/EXT/HP Class Change Controllers.

Complete Class Change System Solutions.

The 6-inch motorised bell needs no introduction, as the sound generated by these bells is known worldwide for use in fire alarm systems, class change systems, school bell systems, as well as industrial applications and other educational establishments.

The 24v grey bell is wired directly from the bell circuit driver terminals within the FASE/701/HP or FASE/701/HP Class Change controllers, with bells then positioned at strategic locations throughout schools, educational premises, or factories to provide clear and precise class change notification.

As most modern fire alarm systems use electronic sounders, using the FASE bell for class change indication provides sounds which cannot be mistaken for each other.

Each bell is supplied with a 'Class Change' label, which is easily fixed to the front of the bell by the installation engineer.

FASE/CC/SND Specifications

• Class Change / School Bell grey, 6-inch motorised bell.
• Can be used with other (none-fire) 24vdc alarm systems.
• Supplied with 'Class Change' screen printed disk.
• Use with or without the printed disk.
• For use with the FASE/701/E/HP and FASE/701/EXT/HP Class Change Timer Controllers.
• Grey Bell Non-EN 54-3 Approved.
• Provides a dedicated Class Change system.
• Wall mounted and for internal use only.
• Output volume of upto 95dB.
• Typical current draw of 25ma at 24vdc.
• Wire upto 64 Class Change bells per circuit when connected to the FASE/701/E/HP controller.

Note: Is difficult to reproduce colours on a screen. The actual Ral colour of the bell gong is RAL 7035.